21017- delta laser-Temp Fault

• Related Articles

• Delta crusader

  bladder was leaking - remove 2 small set-screws - thread a 1/2-13 bolt into the end cap to press it out - pull the bladder assembly out (twisting back and forth seems to help as it is not threaded) *** ALUMINUM COMPONENTS; CAREFUL NOT TO COLLAPSE ...

• 21057-Viper Axis 7 not homing

  Axis 7 was set as the machine post master, Even tho post master was not enabled it was blocking the homing signal. setting post master to 0 fixed the issue. Delta is going to change the code so it shouldn't happen again.